Pro-Built Tools PB1200 Series Manuel d'installation télécharger pdf (Page 4)

ii GTO 4000XL Instruction Manual © 091610

Thank you for purchasing a GTO/ACCESS SYSTEMS 4000XL. When correctly installed and properly used,

your 4000XL operator will give you many years of reliable service. Please read the following information

to ensure you have the correct system for your particular needs. This manual will enable you to properly

install your 4000XL Automatic Gate Operator.

The 4000XL operator is designed for installation on a pull-to-open single leaf gate. The gate must not

exceed 16 feet in length nor weigh more than 650 pounds* (please see Technical Specications on page

1). The 4000XL operator can be used on vinyl, aluminum, chain link, farm tube, and wrought iron gates.

Use on solid (wood) gates is not recommended. Solid surface gates have a high resistance to the wind.

If the wind is strong enough, the operator will obstruct, stop, and blow fuses.

*NOTE: By purchasing and installing the HBP4XL Bracket Set, the 4000XL can accommodate gates that

are 20 feet in length and weigh up to 1000 pounds. The 4000XL can be installed on a push-to-open gate

with the addition of the push-to-open bracket

[R4388].

The 4000XL operator accommodates extra transmitters, digital keypads, solar panels, push buttons,

automatic gate locks, and other access control products. These optional accessories are noted with the

symbol.

The 4000XL operator features adjustable stall force. This safety feature makes the gate stop and reverse

direction within two seconds when it comes in contact with an obstruction. The “MIN” setting means the

gate will exert the minimum force on an obstruction before it stops and reverses direction.

The 4000XL operator also has an adjustable auto-close feature. It can be set to remain open from 3 to

120 seconds before automatically closing. Pressing the transmitter button at any time after the gate fully

opens will cause it to close immediately. “OFF” is the factory setting; meaning the gate will stay open until

you press the transmitter button (or keypad, etc.) again.

Please call GTO at (800) 543-GATE [4283] or (850) 575-0176 for more information about our GTO/ACCESS

SYSTEMS professional line of gate operators and accessories. Our Sales Department will be glad to give

you the name and phone number of a GTO/ACCESS SYSTEMS dealer near you.

BEFORE YOU BEGIN TO INSTALL YOUR AUTOMATIC GATE OPERATOR:

Read these instructions carefully and completely to become familiar with all parts and installation

steps. You must read the installation manual for detailed instructions on gate operator safety

and proper use of the gate operator.

24/7 Troubleshooting Wizard: http://support.gtoinc.com

Please Read This First

, LLC

GTO Accessories are noted with this symbol in this Installation

Manual. Information about accessories can be found on page 27

and at www.gtoaccess.com.

1 2 3 4 5 6 7 8 9 ... 39 40

Pas de commentaire

Pro-Built Tools PB1200 Series Manuel d'installation Page 4